Quantity of DVR:
1 x DS-7108HQHI-K1
HD-TVI TURBO HD 4.0 DVR: Hikvision DS-7108HQHI-K1 (8-ch, 1080p@15fps, H.265+, HDMI, VGA)
- HD-TVI: 1080p, 720p recording resolution at 15 fps, WD1 and lower resolutions at 25 fps,
- HD-CVI, AHD: 2 MP recording resolution at 15 fps,
- Channels 1 and 2 support the recording resolution of 3 MP at 15 fps,
- 1080p lite recording mode: 960×1080 at 25 fps,
- Support for 8 HD-TVI, AHD, or CVBS cameras + two IP cameras (max 4 MP, Hikvision or Onvif compliant),
- Analog channels can be replaced with IP channels in a 1:1 ratio,
- Enhanced IP mode (interferes with VCA functions): 4 IP channels (12 with the analog channels switched off),
- H.265 and H.265+ video compression,
- Management vie the IE browser,
- Channel 0 – all cameras can be monitored with minimum demand for network bandwidth,
- Parallel operation of HDMI and VGA outputs up to 1920 x 1080 pixels,
- Searching recordings by alarm events,
- Digital zoom during live monitoring and playback,
- Synchronous playback from 8 channels,
- Support for IPv4, IPv6,
- Monitoring the statuses of LAN, cameras, and hard drives.
+++Hikvision DS-7108HQHI-K1++ is an 8-channel CCTV DVR capable of recording surveillance video provided in HD-TVI, HD-CVI, AHD, CVBS and IP standards with the resolution of 1080p/720p at 15fps. Channels 1 and 2, however, can support 3MP@15fps. In the case of VGA / WD1 / 4CIF / CIF resolutions, the maximum frame rate is 25 fps.
H.265 video compression
The DVR can record one or two video streams (primary and/or secondary) from each channel. The video can be compressed using the H.265 method. Compared with its predecessor (H.264), H.265 can reduce the data stream by half, which translates into proportional disk space savings and extended data retention time. H.265+ can further minimize the streams in typical video surveillance scenarios.
Special recording modes
Footage can be recorded in different modes: continuous, motion detection (with pre- and post-event recording), alarm (with pre- and post-event recording), or continuous recording with special parameters for specific events. Each channel can be configured individually in this respect. It is possible to change the resolution, quality, and frame and bit rates independently of the continuous recording settings. After the occurrence of an event (motion detection, camera tampering, etc), the DVR automatically switches to the event-recording mode (usually with higher parameters). During the rest of the time the recording is carried out in the continuous mode. The increased parameters just before and after the event allow to play back every second with high detail and smoothness, while the recordings between events may have a much lower performance, taking significantly less storage media space.
Enhanced IP mode
The Enhanced IP mode allows to increase the number of supported IP channels. It disables smart events in analog channels and limits the HDMI-VGA output resolution to 1080p. The mode can be activated only through direct access to the DVR’s menu.
Sophisticated client software
The iVMS 4200 client software enables users to manage Hikvision devices in IP networks. The software enables the configuration and management of NVRs/DVRs, IP and analog cameras in hybrid systems. The iVMS 4200 utility can remotely manage up to 256 devices on up to 4 monitors. One monitor can display images from up to 64 cameras. Aside from system configuration and live monitoring, the utility can be used for remote playback, notifications, two-way audio transmission, and multi-level e-maps.
Hik-Connect is a mobile application intended for smartphones with the Android and iOS operating systems. It can be used for the remote live viewing of footage from DVRs, NVRs, network cameras via Wi-Fi, 2G, 3G or LTE networks, as well as the playback of recorded video files. The application connects to the devices by IP addresses and/or through the P2P cloud service.
Working in the cloud
Hik-Connect is also the name of a network service intended for Hikvison devices. The service is based on cloud data processing and integrates the following functions:
- Remote cloud access
Allows to access the device without an external IP address, when simplicity is of the essence. Only the basic network configuration is required. The PC or smartphone application connects with the device via a P2P cloud service.
- DDNS server
The DDNS assigns a fixed domain name to dynamically changing IP addresses (Dynamic DNS). This feature is useful when the ISP does not provide users with a fixed IP address. To use the DDNS, you need to have a public IP address and provide access from the external network to the appropriate ports of the NVR (server and http, by default 8000 and 80). The connection is established via a web browser or client application on a PC or smartphone.
Advanced applications for organizing and operating video surveillance systems
This article provides an overview of applications dedicated for installers and users of Hikvision-based video surveillance systems.
SADP (Search Active Device Protocol) is a free, easy-to-use utility designed to search for Hikvision IP cameras and DVRs/NVRs in the local network. The network device search tool can also be used to modify device network parameters, e.g. to change or recover default passwords. Detailed information on the software and its use can be found in the following article: SADP application – LAN tool for organizing CCTV systems based on Hikvision devices.
Quantity of Camera:
8 x DS-2CE16D0T-IRP (3.6mm)
Camera Specification:- Image Sensor2 MP CMOS Max. Resolution 1920 (H) × 1080 (V) Min. Illumination0.01Lux @ (F1.2, AGC ON), 0 Lux with IR Shutter Time PAL: 1/25 s to 1/50,000 s NTSC: 1/30 s to 1/50,000 s Day & Night ICR Angle Adjustment Pan: 0 to 360°, Tilt: 0 to 90°, Rotation: 0 to 360° Signal System PAL/NTSC Lens Lens Type 2.8 mm, 3.6 mm, 6 mm fixed lens Focal Length & FOV2.8 mm, horizontal FOV: 106.4°, vertical FOV: 57.9°, diagonal FOV: 124.6° 3.6 mm, horizontal FOV: 79.6°, vertical FOV: 43.5°, diagonal FOV: 93.7° 6 mm, horizontal FOV: 51.9°, vertical FOV: 30°, diagonal FOV: 58.8° Lens MountM12 Image Image Parameters Switch STD/HIGH-SAT Image Settings Brightness, Sharpness, Smart IR / DNR, Mirror Frame RateTVI: 1080P@30fps, 1080P@25fps / PAL: 1080p@25fps,NTSC: 1080p@30fps Day/Night Mode Auto/Color/BW (Black and White) Wide Dynamic Range (WDR)Digital WDR Image Enhancement BLC, HLC White Balance Auto/Manual AGC Yes / Low/middle/high Interface Video Output1 HD analog output General MaterialPlastic DimensionΦ 70 mm × 137.8 mm (Φ 2.76" × 5.43") Approx. 150 g (0.33 lb.) Operating Condition‘-40 °C to 60 °C (-40 °F to 140 °F), humidity: 90% or less (non-condensation) CommunicationHIKVISION-C LanguageEnglish Power Supply12 VDC ± 25% ConsumptionMax. 2.2 W IR RangeUp to 20 m Approval ProtectionIP67
1pcs Power cable
1pcs Power adaptor
1pcs Power transfer cable
Cable: 8 x 18.3m(60ft) Video and power cable
Storage Disk - Depends of your need and storage recording time. Hard Disk (500GB to up 6TB) : Price vary Rs2500 to Rs5000 Installation of Camera & Setup of DVR : Contact Us / Whatsapp