17.9% OFF

Hikvision CCTV 4 Cameras Kit


  • USD: 239.90$

Available on backorder



    Quantity of DVR:

    1 x DS-7104HQHI-K1
    HD-TVI TURBO HD 4.0 DVR: Hikvision DS-7104HQHI-K1 (4-ch, 1080p@15fps, H.265+, HDMI, VGA)

    Key features:

    • HD-TVI: 1080p, 720p recording resolution at 15 fps, WD1 and lower resolutions at 25 fps,
    • HD-CVI, AHD: 2 MP recording resolution at 15 fps,
    • Channel 1 also supports the recording resolution of 3 MP at 15 fps,
    • 1080p lite recording mode: 960×1080 at 25 fps,
    • Support for 4 HD-TVI, AHD, or CVBS cameras + one IP camera (max. 4 MP, Hikvision or Onvif compliant),
    • Analog channels can be replaced with IP channels in a 1:1 ratio,
    • Enhanced IP mode (interferes with VCA functions): 2 IP channels (6 with the analog channels switched off),
    • H.265 and H.265+ video compression,
    • Management vie the IE browser,
    • Channel 0 – all cameras can be monitored with minimum demand for network bandwidth,
    • Parallel operation of HDMI and VGA outputs up to 1920 x 1080 pixels,
    • Searching recordings by alarm events,
    • Digital zoom during live monitoring and playback,
    • Synchronous playback from 16 channels,
    • Support for IPv4, IPv6,
    • Monitoring the statuses of LAN, cameras, and hard drives.
    Hikvision DS-7104HQHI-K1 is a 4-channel CCTV DVR capable of recording surveillance video provided in HD-TVI, AHD, CVBS and IP standards with the resolution is 1080p@15fps. One channel, however, can support 3MP@15fps. For VGA / WD1 / 4CIF / CIF resolutions, the maximum frame rate is 25 fps.
    The upgraded DS-7104HQHI-K1(B) version also supports a 4 MP Lite recording mode (1280×1440@15fps) and one IP camera up to 6 MP.
    H.265 video compression
    The DVR can record one or two video streams (primary and/or secondary) from each channel. The video can be compressed using the H.265 method. Compared with its predecessor (H.264), H.265 can reduce the data stream by half, which translates into proportional disk space savings and extended data retention time. H.265+ can further minimize the streams in typical video surveillance scenarios.
    Special recording modes
    Footage can be recorded in different modes: continuous, motion detection (with pre- and post-event recording), alarm (with pre- and post-event recording), or continuous recording with special parameters for specific events. Each channel can be configured individually in this respect. It is possible to change the resolution, quality, and frame and bit rates independently of the continuous recording settings. After the occurrence of an event (motion detection, camera tampering, etc), the DVR automatically switches to the event-recording mode (usually with higher parameters). During the rest of the time the recording is carried out in the continuous mode. The increased parameters just before and after the event allow to play back every second with high detail and smoothness, while the recordings between events may have a much lower performance, taking significantly less storage media space.
    Enhanced IP mode
    The Enhanced IP mode allows to increase the number of supported IP channels. It disables smart events in analog channels and limits the HDMI-VGA output resolution to 1080p. The mode can be activated only through direct access to the DVR’s menu.
    Sophisticated client software
    The iVMS 4200 client software enables users to manage Hikvision devices in IP networks. The software enables the configuration and management of NVRs/DVRs, IP and analog cameras in hybrid systems. The iVMS 4200 utility can remotely manage up to 256 devices on up to 4 monitors. One monitor can display images from up to 64 cameras. Aside from system configuration and live monitoring, the utility can be used for remote playback, notifications, two-way audio transmission, and multi-level e-maps.
    View of the control panel of the iVMS-4200 application.
    Hik-Connect is a mobile application intended for smartphones with the Android and iOS operating systems. It can be used for the remote live viewing of footage from DVRs, NVRs, network cameras via Wi-Fi, 2G, 3G or LTE networks, as well as the playback of recorded video files. The application connects to the devices by IP addresses and/or through the P2P cloud service.
    The start menu of the Hik-Connect app
    with the live view thumbnail
    The live view screen
    Working in the cloud
    Hik-Connect is also the name of a network service intended for Hikvison devices. The service is based on cloud data processing and integrates the following functions:
      • Remote cloud access
    Allows to access the device without an external IP address, when simplicity is of the essence. Only the basic network configuration is required. The PC or smartphone application connects with the device via a P2P cloud service.
      • DDNS server
    The DDNS assigns a fixed domain name to dynamically changing IP addresses (Dynamic DNS). This feature is useful when the ISP does not provide users with a fixed IP address. To use the DDNS, you need to have a public IP address and provide access from the external network to the appropriate ports of the NVR (server and http, by default 8000 and 80). The connection is established via a web browser or client application on a PC or smartphone.
    Advanced applications for organizing and operating video surveillance systems
    This article provides an overview of applications dedicated for installers and users of Hikvision-based video surveillance systems.
    Main window of the SADP application
    SADP (Search Active Device Protocol) is a free, easy-to-use utility designed to search for Hikvision IP cameras and DVRs/NVRs in the local network. The network device search tool can also be used to modify device network parameters, e.g. to change or recover default passwords. Detailed information on the software and its use can be found in the following article: SADP application – LAN tool for organizing CCTV systems based on Hikvision devices.

    Quantity of Camera:

    2 x DS-2CE16D0T-IRP (3.6mm)
    2 x DS-2CE56D0T-IRP (3.6mm)
    Camera Specification:- 
    Image Sensor2 MP CMOS
    Max. Resolution 1920 (H) × 1080 (V)
    Min. Illumination0.01Lux @ (F1.2, AGC ON), 0 Lux with IR
    Shutter Time PAL: 1/25 s to 1/50,000 s NTSC: 1/30 s to 1/50,000 s
    Day & Night ICR
    Angle Adjustment Pan: 0 to 360°, Tilt: 0 to 90°, Rotation: 0 to 360°
    Signal System PAL/NTSC
    Lens Type 2.8 mm, 3.6 mm, 6 mm fixed lens
    Focal Length & FOV2.8 mm, horizontal FOV: 106.4°, vertical FOV: 57.9°, diagonal FOV: 124.6° 3.6 mm, horizontal FOV: 79.6°, vertical FOV: 43.5°, diagonal FOV: 93.7° 6 mm, horizontal FOV: 51.9°, vertical FOV: 30°, diagonal FOV: 58.8°
    Lens MountM12
    Image Parameters Switch STD/HIGH-SAT
    Image Settings Brightness, Sharpness, Smart IR / DNR, Mirror
    Frame RateTVI: 1080P@30fps, 1080P@25fps / PAL: 1080p@25fps,NTSC: 1080p@30fps
    Day/Night Mode Auto/Color/BW (Black and White)
    Wide Dynamic Range (WDR)Digital WDR
    Image Enhancement BLC, HLC
    White Balance Auto/Manual
    AGC Yes / Low/middle/high
    Video Output1 HD analog output
    DimensionΦ 70 mm × 137.8 mm (Φ 2.76" × 5.43")
    Approx. 150 g (0.33 lb.)
    Operating Condition‘-40 °C to 60 °C (-40 °F to 140 °F), humidity: 90% or less (non-condensation)
    Power Supply12 VDC ± 25%
    ConsumptionMax. 2.2 W
    IR RangeUp to 20 m


    1pcs Power cable
    1pcs Power adaptor
    1pcs Power transfer cable
    Cable: 4 x 18.3m(60ft) Video and power cable


    1 Year
    (Condition Applied)


     Storage Disk - Depends of your need and storage recording time.
    Hard Disk (500GB to up 6TB) : Price vary Rs2000 to Rs5000
    Installation of Camera & Setup of DVR : Contact Us / Whatsapp

    Our Online Guide